The Prolyte CCS6 conical coupler system is designed to offer a rigid and very strong connection between various truss types of the multi purpose series. The conical shape and tapered pins create an optimal connection without the need of use force to assemble or disassemble. Only a hammer is needed to connect your trusses, offering remarkable assembly speed compared to other connection types.

Prolyte Spigot pins are used to secure the conical coupler in its position. Like the conical coupler, the spigot pins are also conical, tapered, in form. A slight tap with a copper hammer should secure them. Please make sure to enter the pin from the right direction in the spigot hole.

Goupille conique filetée avec écrou pour CCS6.

Les broches Prolyte Spigot sont utilisées pour fixer le coupleur conique dans sa position. Comme le coupleur conique, les broches mâles sont également de forme conique, effilée. Un léger coup avec un marteau en cuivre devrait les fixer. Veuillez vous assurer d'entrer la goupille dans le bon sens dans le trou de broche.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

Prolyte's H30 Series truss is constructed of main tubes (48,3 x 3 mm) and diago­nals (16 x 2 mm). Equipped with the CCS6 conical coupling system, the H30 truss is fast and easy to assemble.

CRE:ON Hybrid Drive
Built in power supply
up to 1000 pixels output
Switchable ArtNet/sACN/Kling-Net/SPI modes
2.8” resistive touch screen
Daisy chain power & Ethernet